Advertisement
Available languages
Available languages
C
INFORMATION
• In addition to the method above, to deactivate the Child Lock, switch the Programme Selection
knob to On/Off position when no programme is running, and select another programme.
• Child Lock will not be disabled after a power failure or unplugging.
AntiPieaga+ (AntiCrease+)
•
If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected
and the programme follow-up light of the relevant programme will turn on. When this function
is selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at
the end of the programme. At any time during these eight hours, you can cancel the programme
and unload the machine. Just press any button or turn the programme selection knob to end the
function. The programme follow-up light will remain on even if you end the function by pressing
any button. If you end the function by turning the programme selection knob, the programme
follow-up light will remain on or go off depending on the selected programme. If you do not
cancel the function by pressing the Auxiliary Function button 3 for 3 seconds, it will be used in
the next washing cycles as well.
4.3.11 End Time Adjustment
The End Time Adjustment function allows you to set the end time of the programme up to 19
hours. You can increase this time by 1-hour intervals.
C
INFORMATION
• Please do not use liquid detergent if you have selected the End Time Adjustment function.
Stains might remain on the clothes.
1. Open the loading door, place the laundry and add detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Press the End Time Adjustment button and select the desired time.
4. Press the Start/Pause button. The delayed end time you have set will be displayed.
Countdown will start for delayed end. On the display, "_" will move up and down next to the
delayed end time.
C
INFORMATION
• If the programme has not started, you can add laundry into the machine during the
delayed end time.
5. At the end of the countdown, duration of the selected programme will be displayed. "_" will
disappear and the selected programme will start.
Changing the delayed end time
If you want to change the time during countdown: Turn the programme selection knob to cancel
the delayed end time function, and then set the desired time again.
1. Press the End Time Adjustment button. When pressed for the first time, the programme
duration will be rounded up to the closest whole number time. Each following press will
increase the time by an hour.
2. If you want to decrease the delayed end time, press the End Time Adjustment button
consecutively until the desired time is displayed.
Cancelling the delayed end function
If you want to cancel the delayed end time countdown and start the programme immediately:
1. Set the Programme Selection knob to any programme. This way, the Delayed End time will be
cancelled. The End/Cancel light will flash continuously.
2. Then, select the programme you want to run again.
3. Press Start/Pause button to start the programme.
Washing Machine / User's Manual
51 / EN
Advertisement
