Linux - Digicom HSDPA User Manual

3G Modem USB Internal

2.2.2. Linux

Perform the hardware installation first and then the driver installation (\driver\linux).
• Refer to the Kernel folder installed on your computer (command: uname -r) and digit the following commands:
• unzip v.x.y.z_Kernel2.x.y.zip (i.e. v1.3.1b_Kernel2.6.22.zip)
• cd v.x.y.z_Kernel2.x.y
• Enter the directory containing "Makefile" and "sierra.c".
Compile and install the driver with the following commands:
• make
• make install
Note: You must be administrator or Super User (# su) to execute these commands.
• With "modinfo sierra" command you can verify the installed driver version.
• With "lsusb" command you can verify if 3G Modem USB Internal has been recognized by Linux.
2.4
(i.e. v1.3.1b_Kernel2.6.22)
Installation