JVC SP-AT7 Instruction Manual page 11

2. Drill 2 sets of parallel holes (Ø 3-8 mm each according to wall type) in the wall. Firmly fix
1 dowel (not inclued) into each hole in the wall if necessary.
3. Insert 1 screw (included) into each dowel. Be sure to leave a 3 mm gap between the
wall and the screw's head. Lift the unit over the heads of the screws and slot into place.
Dowel
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
120 mm
3 mm
25-30 mm
GB
11