Table of Contents
Advertisement
Quick Links
Fountain Components
Image
Item Description
Longvue
Fountain - Small
Bowl
Longvue Estate
Fountain - Finial
Longvue Estate
Fountain - Small
Pedestal
Longvue Estate
Fountain -
Small Door
Longvue Estate
Fountain -
Medium Door
Longvue Estate
Fountain -
Med. Pedestal
Longvue Estate
Fountain - Large
Bowl
Longvue Estate
Fountain - Large
Pedestal
Longvue Estate
Fountain - Base
FT-240 Three Tier Longvue Fountain
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 21 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPP800 - 800 GPH pump (15 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-225B
1
FT-239A
1
FT-239C
1
FT-239D
1
FT-239E
1
FT-239F
1
FT-239H
1
FT-239I
1
FT-239J
1
Assembly Instructions
Pump Kit Parts List
Image
Component
PK800 Pump
#10 Stopper
#7 Drain stopper with wing nut
Approx. 2" length of 3/4" clear vinyl
Approx. 2" length of 5/8" clear vinyl
Approx. 80" length of 1/2" black
non-kink tubing
7.5" length of 1.5" PVC pipe - standpipe
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
tubing
1
tubing
1
1
Wedges
4
1
rev 4/29/2020
Advertisement
Table of Contents
Related Manuals for Campania International Longvue FT-240
Summary of Contents for Campania International Longvue FT-240
- Page 1 FT-240 Three Tier Longvue Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 21 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-240 Three Tier Longvue Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-240 Three Tier Longvue Fountain Assembly Instructions Step 7 - Position the medium pedestal (FT-239F) over the pump in the large bowl (FT-239H). Step 8 - Feed the non-kink tubing connected to the pump through the top of the medium pedestal (FT-239F).
- Page 4 FT-240 Three Tier Longvue Fountain Assembly Instructions Step 15 - Fit the finial (FT-239A) into the small bowl (FT-225B) by feeding the protruding copper pipe from the bowl into the hole in the bottom of the finial. FT-239A (14 lbs) 5.5"W x 13.5"H Step 16 - Place the small pump cover door (FT-239D) into the small pedestal (FT-239C).
- Page 5 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.
Need help?
Do you have a question about the Longvue FT-240 and is the answer not in the manual?
Questions and answers