Advertisement
Quick Links
Fountain Components
Image
Item Description
Equinox
Garden Terrace
Fountain Water
Feature
Equinox Garden
Terrace
Fountain Basin
Fountain Information:
• This fountain holds approximately 1 gallon of water.
• A fountain cover is not available for this fountain.
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Component
Quantity
Item #
FT-243A
1
FT-243B
1
FT-243 Equinox
Garden Terrace Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120-LV Pump with Transformer
#7 Stopper
2" length of PermaGum Putty
Approx. 6" length of 1/2" black
non-kink tubing
1" length of 5/8" clear vinyl tubing
1" length of 1/2" PVC pipe
Adhesive Dots
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
4
1
rev 3/30/2020
Advertisement
Related Manuals for Campania International FT-243
Summary of Contents for Campania International FT-243
- Page 1 FT-243 Equinox Garden Terrace Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 1 gallon of water. • A fountain cover is not available for this fountain. • No refill device or submersible lights are suggested for this fountain.
- Page 2 FT-243 Equinox Garden Terrace Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-243 Equinox Garden Terrace Fountain Assembly Instructions Step 6 - Fill the basin enough to cover the pump completely with water to check for leaking. 6a - If leaking occurs… - Remove the stopper and repeat step 5 again. - Use some of the excess putty to seal the cord around the top of the stopper.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.