At+Qfclose Close The File - Quectel WCDMA UG FILE Series At Command Manual

Write Command
AT+QFTUCAT=<file_handle>
Parameter
<file_handle>
<err>

2.12. AT+QFCLOSE Close the File

AT+QFCLOSE closes the file and ends the operation to the file. The file handle is released and should not
be used again, unless open the file again with "AT+QFOPEN".
AT+QFCLOSE Close the File
Test Command
AT+QFCLOSE=?
Write Command
AT+QFCLOSE=<file_handle>
Parameter
<file_handle>
<err>
WCDMA_UGxx_FILE_AT_Commands_Manual
OK
Response
OK
or
+CME ERROR: <err>
The handle of the operated file
The error code from the module (see the Appendix A)
Response
+QFCLOSE: <file_handle>
OK
Response
OK
or
+CME ERROR: <err>
The handle of the operated file
The error code from the module (see Appendix A)
UMTS/HSPA Module Series
WCDMA UGxx FILE AT Commands Manual
Confidential / Released 15 / 19