Lock; S-Plasma Ion - Samsung MWR-SH11UN User Manual

Lock

This function allows you to lock the whole display of the wired remote controller.
1. Press and hold the [ Lock ] button for more than 3 seconds.
- indicator will be displayed.
2. will blink if you press any buttons except [ Lock ] button.
- Press and hold the [ Lock ] button for more than 3 seconds again, this function will be canceled.

S-Plasma Ion

Eliminate dangerous airborne contaminants and allergens, as well as bacteria and virus.
You can set or cancel the S-Plasma Ion function in the user setting mode.
- If the S-Plasma Ion function is not supported,
You can see how to access user setting mode at the page 18~19.
NOTE
will blink when you set the S-Plasma Ion function.
User Setting
Mode
ENGLISH-16