Lock
This function allows you to lock the whole display of the wired remote controller .
1 . Press and hold the [ Lock ] button for more than 3 seconds .
-
indicator will be displayed .
2 .
will blink if you press any buttons except [ Lock ] button .
- Press and hold the [ Lock ] button for more than 3 seconds again, this function will be canceled .
S-Plasma Ion
Eliminate dangerous airborne contaminants and allergens, as well as bacteria and virus .
You can set or cancel the S-Plasma Ion function in the user setting mode .
- If the S-Plasma Ion function is not supported,
• You can see how to access user setting mode at the page 18~19 .
NOTE
MWR-SH11N_IB_EN_DB68-08072A-00.indd 16
will blink when you set the S-Plasma Ion function .
User Setting
Mode
ENGLISH-16
2018/10/16 19:41:55