Needle And Presser Foot Section; Embroidery Unit - Brother 888-G90 Operation Manual

Needle and presser foot section

f
e
1 Needle bar thread guide
Pass the upper thread through the needle bar thread guide.
2 Needle plate
3 Needle plate cover
Remove the needle plate cover to clean the bobbin case and
race.
4 Bobbin cover/bobbin case
Remove the bobbin cover and then insert the bobbin into the
bobbin case.
5 Embroidery foot
The embroidery foot helps control fabric flexibility for better
stitch consistency.
6 Embroidery foot screw
Use the embroidery foot screw to hold the embroidery foot in
place.
Names of Machine Parts and Their Functions

Embroidery Unit

c
1 Embroidery frame holder
Insert the embroidery frame into the embroidery frame holder
to hold the frame in place. (page B-33)
2 Frame-securing lever
Press the frame-securing lever down to secure the embroidery
frame. (page B-33)
3 Embroidery unit connection
Insert the embroidery unit connection into the connection port
when attaching the embroidery unit. (page B-26)
4 Carriage
The carriage moves the embroidery frame automatically when
embroidering. (page B-26)
5 Release button (located under the embroidery unit)
Press the release button to remove the embroidery unit.
(page B-27)
• Before inserting or removing the embroidery
unit, turn the main power to OFF.
• After the embroidery frame is set in the frame
holder, be sure the frame-securing lever is
correctly lowered.
CAUTION
Basic operations B-3
B