Table of Contents
Advertisement
SAGINAW CONTROL & ENGINEERING • A/C USER MANUAL
B
Any repairs that may be needed must only be done by qualified personnel. The cooling unit is a low maintenance type and
for most environments, no filter is required. If an air filter is installed, check it periodically for dirt and clogs. Clean or replace
filter when necessary.
Disposal
The cooling unit contains R134a refrigerant and small quantities of lubricating oil. Replacement, repairs and final disposal
must be done according to the regulations of each country for these substances.
During transport and storage the cooling unit must be kept in the position marked on the box and at a temperature between
-40˚F and 158˚F and a relative humidity of max. 95% (at 77°F). Check that the packaging has not been damaged during
transport.
1 x Air Conditioner
1 x Instruction Manual with technical information
1 x Mounting Template in 1:1 scale
1 x Installation pack containing:
10 x M6 Bolts
10 x A6.4 Toothed Washers
10 x A6.4 Washers
1 x Female Connector with shorted wired positions for door contact
Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: (989) 799-6871
Fax: (989) 799-4524
sce@saginawcontrol.com
16. Maintenance & Cleaning
Always switch power supply off before starting any maintenance on the unit.
17. Transportation & Storage
18. Parts Supplied
16
back to top
Advertisement
Table of Contents
