Bosch Professional GEX 125-1 A Original Instructions Manual page 8

8 | English
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry sanding of
wood, plastic, metal, filler as well as coated sur-
faces.
Machines with electronic control are also suita-
ble for polishing.
Technical Data
Random Orbital Sander
Article number
Preselection of orbital stroke rate
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding plate diameter
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
1 609 929 S74 | (28.7.09)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
(GEX 125-1 AE)
3 Dust box, complete (micro filtersystem)
4 Sanding plate
5 Sanding sheet*
6 Screws for sanding plate
7 Extraction outlet
8 Filter element (micro filtersystem)
9 Vacuum hose*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
GEX 125-1 A
Professional
3 601 C87 0..
W
-1
min
-1
min
mm
mm
kg
GEX 125-1 AE
Professional
3 601 C87 5..
–
250
12000 7500–12000
24000 15000–24000
2.5
125
1.3
/II
Bosch Power Tools
250
2.5
125
1.3
/II