Page 1
All manuals and user guides at all-guides.com website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.html PLASMA TV SERVICE MANUAL CHASSIS : DF-057B MODEL : 60PY2D 60PY2D-AB CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
All manuals and user guides at all-guides.com SAFETY PRECAUTIONS IMPORT ANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards.
All manuals and user guides at all-guides.com DESCRIPTION OF CONTROLS D/A TV POWER selects analogue or digital mode. switches the set on from standby or off to standby. MODE INPUT Selects another device. Selects the TV, AV, Component, RGB or D/A TV INPUT HDMI modes.
Page 5
All manuals and user guides at all-guides.com <Front Panel Controls> INPUT 1. Remote Control Sensor (Programme Up/Down) Selects a programme or a menu item. 2. Power Button Switches the set on from standby. Switches the set on from standby or off to standby. (Volume Up/Down) Adjusts the volume.
Page 6
All manuals and user guides at all-guides.com <Back Panel> A/V INPUT2 A/V INPUT2 AC INPUT 1. RS-232C INPUT (CONTROL/SERVICE) PORT 6. AUDIO/VIDEO IN SOCKETS (A/V INPUT1) Connect to the RS-232C port on a PC. Connect the audio/video out sockets of external equipment to these sockets.
1) Performance : LGE TV test method followed. 2) Demanded other specification Safety: CE, IEC specification EMC : CE, IEC Model Name Market Remark 60PY2D Australia Safety : IEC60065, EN60065 EMC : CISPR 13 Class B General Specification Specification Item...
Page 8
All manuals and user guides at all-guides.com PDP MODULE(PDP60X5) 1) General Specification Specification Item Remark Unit Display area 1319.6(H) * 741.9(V) ± 0.5 Outline dimension 1408(H) * 828(V) * 60(D) ± 1 Number of Pixels 1366(H) * 768(V) 1Pixel = 3RGB Cells Cell Pitch 322(H) * 966(V) 1Pixel = 3RGB Cells...
All manuals and user guides at all-guides.com ADJUSTMENT INSTRUCTIONS 1. Application Object (2) Va Adjustment 1) After receiving 100% Full White Pattern by Video/RGB These instructions are applied to all of the PDP TV, DF-057B. or selecting White Mode of Heat-Run Mode, Execute HEAT RUN over 10 minutes.
Page 10
All manuals and user guides at all-guides.com 4-4. EDID S/W Execution and Setting 5. AD9883A-Set Adjustment 1) Connect the Set, EDID Download Jig, PC & Cable. And 5-1. Synopsis Execute the S/W : EDID TESTER Ver,2.5 2) Set up S/W option AD9883A-Set adjustment to set the black level and the Gain Repeat Number : 3 of optimum with an automatic movement from the analog =>...
Page 11
All manuals and user guides at all-guides.com [ [ . RS-232C Command (Automatic Adjustment) RS-232C Command CENTER [CMD ID DATA] (DEFAULT)(Hex) Cool Warm Cool Warm R Gain G Gain B Gain R Offset G Offset B Offset 6-3. Adjustment of White Balance(manual) Operate the Zero-calibration of the CA-100, then attach sensor to PDP module surface when you adjust.
All manuals and user guides at all-guides.com TROUBLE SHOOTING 1. Sanken Power Board Structure P806 T221: Vs Trans T271: Va Trans T121: St-by Trans T201: Low Voltage Trans - 12 -...
Page 13
All manuals and user guides at all-guides.com 2. Protect Mode (1) Symptom After once shining, it does not discharged minutely Ø from the module The Rely falls(The sound is audible “click”) Ø It is converted with the color where the front LED Ø...
Page 14
All manuals and user guides at all-guides.com 3. No Raster (1) Symptom It does not discharged from the module. Ø It maintains the condition where the front LED is green. Ø (2) Check following Is the Power Board Is output the normality Low/High Replace Power normal? voltage except Stand-by 5V?
Page 15
All manuals and user guides at all-guides.com 4. No Power (1) Symptom It is not discharged minutely from the module. Ø Light does not come in into the front LED. Ø (2) Check following Is the power cord plug in? Plug in the power cord.
Page 16
All manuals and user guides at all-guides.com 5. In case of occurring strange screen into specific mode 5-1. In case the OSD does not displayed (1) Symptom LED is green Ø The minute discharge continuously becomes Ø accomplished from module (2) Check following Is the LVDS cable Is the LVDS cable...
Page 17
All manuals and user guides at all-guides.com 5-2. In case of does’t display the screen into specific mode (1) Symptom The screen does not become the display from specific input mode Ø (2) Check following Check the all input mode should become normality display. Ø...
Page 18
All manuals and user guides at all-guides.com (5) in case of becomes unusual display from Component, RGB-DTV/PC mode Is the Input voltage, IIC Is the CXA2181Q Communication and Replace the IC (IC401) normal? HV sync normal? Is the Input voltage, IIC Is the AD9883 Communication and Replace the IC...
Page 19
All manuals and user guides at all-guides.com 6. In case of no sound (1) Symptom LED is green Ø Screen display but sound is not output Ø (2) Check following (If HDMI sound is not output, Check the EDID at first) Is the SPK Is the SPK cable Replace SPK cable...
Page 31
All manuals and user guides at all-guides.com For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film digit in the P/No. means as CE : Electrolytic RN : Metal Film follows;...
Page 32
All manuals and user guides at all-guides.com For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film digit in the P/No. means as CE : Electrolytic RN : Metal Film follows;...
Page 33
All manuals and user guides at all-guides.com For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film digit in the P/No. means as CE : Electrolytic RN : Metal Film follows;...
Page 35
All manuals and user guides at all-guides.com For Capacitor & Resistors, CC, CX, CK, CN : Ceramic RD : Carbon Film the charactors at 2nd and 3rd CQ : Polyestor RS : Metal Oxide Film digit in the P/No. means as CE : Electrolytic RN : Metal Film follows;...