Advertisement
Table of Contents
P1
Back
P4
Seat Support
1 EA Cylinder 1 EA Casters 5 EA
Do not use unless all screws are tight. At least every six months, check all
screws to be sure they are tight. If any parts are missing, broken, damaged
or worn, stop using the product until repairs are made by your dealer using
#34730
Champ Big & Tall Chair
Parts/Hardware
P2
1 EA
P5
factory authorized parts.
support@moorecoinc.com
Email us at
if you have Missing or Damaged Parts
24 Hours a Day 7 Days a Week
Should you require assistance during
assembly, please call our Customer
Service Department Monday - Friday
8 a.m. - 5 p.m. Central Standard Time
1-800-749-2258
Seat 1 EA
P7
P6
1"- Screws
P3
Base
P8
1 1/4"-Screws
4 EA
4 EA
1 EA
Advertisement
Table of Contents
Related Manuals for Balt 34730
Summary of Contents for Balt 34730
- Page 1 #34730 Champ Big & Tall Chair support@moorecoinc.com Email us at if you have Missing or Damaged Parts 24 Hours a Day 7 Days a Week Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m.
- Page 2 STEP 2 STEP 1 Attach the Seat Support (P4) to the bottom Push in five Casters (P6) into the bottom of the Base (P3). Insert the Cylinder (P5) of the Seat (P2) using four 1” Screws (P7). Tighten Screws with a Phillips screwdriver. into the top of the Base (P3).
Need help?
Do you have a question about the 34730 and is the answer not in the manual?
Questions and answers