Electrolux MQ926GNE User Manual page 59

2_Electrolux_EN230_MG_AG15_Layout 1 28/04/2015 08:36 Page 59
9.2 Connecting the appliance to the power supply
9.3 Electrical connections
The manufacturer declines any liability
should this safety measure not be
observed.
IMPORTANT!
Ensure the bottom of the oven is
85 cm or more above the floor. It is
important to ensure that the
installation of this product conforms
(A)
WARNING!
THIS APPLIANCE MUST BE
EARTHED
to the instructions in this operation
manual and the conventional oven
manufacturer's installation
instructions.
• The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or
it should be possible to isolate the
oven from the supply by incorporating
a switch in the fixed wiring in
accordance with the wiring rules.
• The socket should not be positioned
behind the cupboard.
• The best position is above the
cupboard, see (A).
• Connect the appliance to a single
phase 230 V/50 Hz alternating current
via a correctly installed earth socket.
The socket must be fused with a 16 A
fuse.
• The power supply cord may only be
replaced by an electrician.
• Before installing, tie a piece of string to
the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into the
high-sided cupboard, DO NOT crush
the power supply cord.
• Do not immerse the power supply
cord or plug in water or any other
liquid.
If the plug that is fitted to your appliance
is not suitable for your socket outlet, you
must call your local ELECTROLUX
service agent.
ENGLISH
59