Operating The Generator; Daily Pre Operational Checks; Using The Ptg Series Controller - Power Tech Generators PTI-15SI-T4F Operator's Manual

 Check the engine oil level to be appropriate level
 Check for tightness of battery cables/terminals.
 Check battery terminals for absence of corrosion
 Check coolant level for proper Fill (add if necessary)
 Check for absence of water in fuel (drain if necessary)
 Check for absence of DTC or failures
 Check for absence of excessive fan belt looseness
The LCD display is the primary source of information of the controller. The LCD
allows you to view/change settings and monitor the status of sensors and other
engine parameters.
* NOTE: The genset mounted controller must be in "AUTO" mode in order to enable the remote
panel functionality.

Operating the Generator

Daily Pre Operational Checks

Using the PTG Series Controller

PTI-15/20SI-T4F Operators Manual
Generating Power to the World
Page 13 of 26