Advertisement
Operation
Bagger Usage
NOTE: When both grass bags are full, place the tractor on a firm,
level surface, disengage the PTO, turn the tractor engine off and
set the parking brake.
1.
Open the grass bag cover by lifting the lower rear of the
cover and pivoting it upwards. See Figure 5-1. It is not
necessary to remove the discharge chute in order to empty
the grass bags.
Figure 5-1
2.
Remove the grass bags by lifting up the rear side of the bag
and moving the bags away from the bag support assembly.
3.
Empty the grass clippings at a proper disposal site. Holding
the bag firmly, turn upside down, and empty the contents.
4.
To reinstall the grass bags, insert the leading edge onto
the bagger mount assembly (1 in Figure 5-2), and pivot the
grass bag rearward and down as shown in 2 of Figure 5-2.
Figure 5-2
5.
Close the grass bag cover, restart your tractor and resume
cutting your grass.
5
1
2
11
Advertisement
