Interfaces - Huawei S9300 Hardware Description

Quidway S9300 Terabit Routing Switch
Hardware Description
4. ACT indicators of the upper
optical interfaces
Buttons and Indicators on the Panel
Table 5-97
Table 5-97 Description of buttons and indicators on the G24CEAS panel
Indicator/Button
RUN/ALM
ACT
LINK
LINK/ACT

5.18.4 Interfaces

Table 5-98
Table 5-98 Types and functions of the interfaces on the G24CEAS
Name
10M/100M/1000M
BASE-T electrical
interface
Issue 02 (2012-04-30)
5. Link indicators of the lower
optical interfaces
describes the buttons and indicators on the G24CEAS panel.
Color
Green
Red
Orange
Amber
Green-yellow
Green
describes the types and functions of the interfaces on the G24CEAS.
Quantity
8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6. Link indicators of the upper
optical interfaces
Description
If the indicator is on, it indicates that the board
is powered on but the software is not running.
If the indicator blinks once every 2s (0.5 Hz),
it indicates that the system is in normal state.
If the indicator blinks once every 0.25s (4 Hz),
it indicates that the system is being started.
If the indicator is on, it indicates that the board
is faulty.
If the indicator is on, it indicates that the board
is installed in the slot and is powered on.
If the indicator blinks, it indicates that data is
being transmitted.
If the indicator is on, it indicates that the link
is connected.
If the indicator is on, it indicates that the link
is connected.
If the indicator blinks, it indicates that data is
being transmitted.
Description
The G24CEAS provides 8 Ethernet electrical
interfaces (10M/100M/1000M auto sensing)
to transmit and receive 1000 Mbit/s Ethernet
services.
5 Boards
126