Advertisement
Chained Note Recognition
•
Chained-note recognition alerts when a leading bill has pulled in a trailing bull
prematurely.
•
To increase the sensitivity in detecting chained-notes, hold the 'ADD' button for at
least 3 seconds until the display screen shows 'C' followed by a number (ie, 'C-05').
•
The default sensitivity setting is C-05, however this can be adjusted by pressing the
Increase (+) button or Decrease (–) button. The total range is C-00 to C-10. A higher
number represents higher sensitivity for chained-note detection.
•
Press the 'RESTART' button to save your changes.
Ultraviolet Sensitivity
•
The ultraviolet light sensitivity helps detect fake paper and plastic notes with
fluorescence.
•
To increase the sensitivity in detecting abnormalities, hold the 'UV' button for at
least 3 seconds until the display screen shows 'A' followed by a number (ie, 'A-10').
•
The default sensitivity setting is A-10, however this can be adjusted by pressing the
Increase (+) button or Decrease (–) button. The total range is A-00 to A-20. A higher
number represents higher sensitivity for detecting fake notes and plastic notes with
fluorescence.
•
Press the 'RESTART' button to save your changes.
Magnetic Sensitivity
•
The magnetic sensitivity helps detect fake paper and plastic notes with magnetic
components.
•
To increase the sensitivity in detecting abnormalities, hold the 'MG' button for at
least 3 seconds until the display screen shows 'B' followed by a number (ie, 'B-05').
•
The default sensitivity setting is B-05, however this can be adjusted by pressing the
Increase (+) button or Decrease (–) button. The total range is B-00 to B-20. A higher
number represents higher sensitivity for fake paper and plastic notes with magnetic
components.
•
Press the 'RESTART' button to save your changes.
Factory Reset
•
To perform a factory reset, first turn off the device, then hold the Increase (+) and
Restart buttons simultaneously for at least 3 seconds until the display screen
shows:
•
Now turn the device on. The factory reset will be complete.
Advertisement
