BEFORE FIRST USE Connect the machine to the power supply Connect the power cord to a wall outlet or power supply (AC 220V ±10%, 50Hz). Note that this device must be operated under the required voltage and frequency. Prepare the device Ensure the device is set up on a secure, durable and level surface.
Page 4
Preparing the banknotes Before starting to count the banknotes, please check whether there are clips, staples, elastic bands or coins in the banknotes. Remove all of these, as they may jam the device or result in counting errors. Clips Staples Elastic bands Coins Check for any wet, sticky or very dirty banknotes.
OPERATION Control panel overview: Basic operation: Switch from Auto Mode to Manual Mode • Upon start up, the device with begin in Auto mode as default. • To switch to Manual mode, press and hold the 'RESTART' button for 3 seconds until the display screen reads ‘NO’.
Page 6
Addition Mode • In Addition mode new inputs are added to the total counted, not resetting with each new input. • To turn on Addition mode, press the ‘ADD’ button until the Addition light turns on. • To turn Addition mode off, simply press the ‘ADD’ button once again. The light will turn off.
Page 7
Chained Note Recognition • Chained-note recognition alerts when a leading bill has pulled in a trailing bull prematurely. • To increase the sensitivity in detecting chained-notes, hold the ‘ADD' button for at least 3 seconds until the display screen shows ‘C’ followed by a number (ie, ‘C-05’). •...
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...