Connect To Wireless Access Point; 2-3-1Using Edimax Wireless Utility - Edimax EW-7108PCg User Manual

2-3 Connect to Wireless Access Point

After the driver is correctly installed, it will try to connect to any
unencrypted wireless access point automatically. If you want to
connect to a specific wireless access point, or the access point you
wish to connect uses encryption, you have to configure the wireless
network card and input required parameters, to get connected to
the wireless access point you wish to connect.
There are two ways you can configure your wireless network card
to connect to wireless access point: using the Edimax configuration
utility which comes with wireless card driver, and using built-in
windows zero configuration utility.

2-3-1Using Edimax Wireless Utility

Please follow the following instructions to use Edimax configuration
utility to connect to wireless access point.
1. Right-click the Edimax configuration utility icon located at
lower-right corner of computer desktop, then click 'Launch
Config Utilities'.
25