Edimax EW-7206APg User Manual page 26

D H C P Ser ve r S e t t in g
DHCP Server will automatically give your LAN client an IP address. If the DHCP is not enabled then you'll
have to manually set your LAN client's IP address. There is only one DHCP server allowed in one network. If
you have a router or other DHCP server, please keep this feature disabled.
Parameter
Default Gateway IP
Domain Name Server IP
Start IP/End IP
Domain Name
Lease Time
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
Specify the gateway IP in your network. This IP address should be
different from the Management IP.
This is the ISP's DNS server IP address that they gave you; or you
can specify your own preferred DNS server IP address.
You can designate a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients. By default the IP
range is from: Start IP 192.168.2.100 to End IP 192.168.2.200.
You can specify the Domain Name for your Access Point.
The DHCP Server when enabled will temporarily give your LAN client
an IP address. In the Lease Time setting you can specify the time
period that the DHCP Server lends an IP address to your LAN clients.
The DHCP Server will change your LAN client's IP address when this
time threshold period is reached.
Description