System Utility - Edimax EW-7206APg User Manual

3 . 2 .6 S ys t e m U t i l i t y
From here, you can define the Access Point's IP Address and Login Password and enable the Access Point
to be a DHCP Server. You can change AP's IP address to meet your network IP range so you can log in to
set up page easily next time.
Parameter
Current Password
New Password
Re-Enter Password
IP Address
Subnet Mask
Gateway Address
DHCP Server
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
Enter the current password (up to 15-digit alphanumeric string) of the
Access Point. The default password for the Access Point is 1234. Note
that the password is case-sensitive.
Enter the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
Reconfirm the password (up to 15-digit alphanumeric string) you want
to login to the Access Point. Note that the password is case-sensitive.
Designate the Access Point's IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.2.1.
Specify a Subnet Mask for your LAN segment. The Subnet Mask of
the Access Point is fixed and the value is 255.255.255.0.
The IP address of the default gateway of the subnet that this access
point resides in. It allows this access point be accessed by PC from
deferent subnet to do configuration.
Enable or disable the DHCP Server.
Description