Advertisement
5) Turn off the tablet(Venue 7 3740/Venue 8 3840).
6) Click "Begin Download" button.
7) Press the volume up button and then plug in the USB cable.
8) If it's your first time to connect the tablet to PC, it'll need some time to recognize the
driver. After driver installation automatically, go to steps 5 again.
9) The flashing tool pops up the dialog as below, press "OK".
10) When firmware flash is done, Flash Tool will show Success: FW+OS Download
Completed!
Dell Open Source Guide
Page 8 of 13
Advertisement
