Download Print this page

WilTec AS20W Instruction Manual page 5

Airbrush compressor with vacuum pump

Advertisement

Technical specifications
Type
Power (W)
Rotation speed (rpm)
Flow rate (
)
min
Pressure range (㍴)
Vacuum range (㍴)
Weight (㎏)
Size (㎜)
Sound level (dB)
Notes
You may use nozzles from 0,2 to 1,0 mm.
The compressor has a 9,51 mm (⅛") outlet (male thread), which can be effortlessly changed to
¼". The matching adapter is not included in the delivery.
When the compressor is connected by the hose to the airbrush gun, it can be connected to the
mains and switched on.
The maximum pressure is displayed by the pressure gauge.
The hose included in the delivery is air-tight. If the auto-stop mode is activated (repeatedly
switched on/off) any and all screw fittings and connections should be sealed by sealing tape.
Leakage check
Switch on the compressor and wait until the maximum pressure has built up and the auto-stop
function has been activated.
If there is no leakage, the pressure gauge should display nearly constantly the same range of
pressure.
A quick decrease of the range of pressure suggests that there is in fact a leakage.
It is of great importance to seal any leak as soon as possible in order to avoid any impact on
the capacity and efficiency of the compressor.
A leakage leads to the auto-stop and auto-start constantly being switched on and off.
Difference between maximum pressure and operating pressure
The maximum pressure is the highest possible pressure that a compressor is able to generate.
Once the maximum pressure has been reached, the compressor switches off (auto-stop), and
as soon as the pressure starts to decrease, it switches on again (auto-start).
The maximum pressure is the pressure measured only inside the compressor itself.
On the outlet of the compressor, there is a lower pressure; the pressure that you actually work
with remains. The operating pressure may vary according to the connected airbrush gun.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Piston compressor
150 (0,2 hp)
1450–1700
20–23
0–4
approx. 0,79
3.7
255×135×170
approx. 40
Item 34202
Page 5
06
2021-1

Advertisement

loading

This manual is also suitable for:

34202