Advertisement
7. Storing the codes
Once the code cards have been arranged, it is time to instruct Elsa to solve the maze. There is a
scanner on the bottom of the main board. This is where the code cards are scanned. Starting with
the first card, put each card on the scanner in the desired direction to scan the black & white code
underneath and add it to the program code. Do this by aligning the three dots on the edge of the card
with the dots above the scanner, and then press the button underneath the single dot near the centre
of the card. The main board will beep once to indicate that the card was scanned successfully. If the
main board does not beep or beeps twice, this indicates that the card was not scanned successfully
and you will need to scan the card again.
Make sure the code card is aligned tightly with the edge of the scanner, otherwise any light that
passes though the gaps may affect the scanning process and cause Elsa to move in a random manner.
If you notice some errors, restart the coding process by scanning the
incomplete circle with an arrow). All previous codes will be cleared. You will hear two long beeps
to indicate that the codes were cleared successfully.
DETAILED INSTRUCTIONS
A
D
C
B
CLEAR card (the
12
Advertisement
