Table of Contents
Advertisement
become a potential safety trouble.
1.22 In addition to plasma screen, the glass is a part of high value. It has such functions as
anti-radiation, adjustment of color temperature etc. Please handle it carefully.
2. "Criterion for Identifying the Defects on Screen"
The PDP produced by our Company at present uses the following criterion for identifying the defective
points:
2.1 Model PS-42XX:
There may appear three kinds of defective points for this model as shown in Fig.1, i.e., bright spot
(remain bright); dark spot (non-illuminating); flickering spot (continuously flickering).
However they should not exceed the specification as in table 1. Otherwise the product shall be deemed
as sub-standard.
Kind
Dark spots
Bright spot
Flickering spot
2.2 Model PH-42XX:
Zone B
Zone A
H
W/4
Figure 1
Table 1 Criterion for Three Kinds of Defective Points
Area A
No more than 2
No more than 1
No more than 1
W
W/2
W/4
Defective Points
Area B
No more than 8
No more than 2
No more than 2
3
H/4
H/2
H/4
Remark
Total number of defective
points in A and B shall not
exceed 8. The distance
between
two
points shall not be shorter
than 15mm.
defective
Advertisement
Table of Contents
