OEM changes. If a discrepancy is found in this manual, contact VMAC prior to initiating or proceeding with installation, service or repair. Current information may clarify the issue. Any person with knowledge of such discrepancies, who proceeds to perform service and repair assumes all risks.
(ii) services are completed in accordance with the Owner’s Manual; (iii) proof of purchase of applicable service kits are made available to VMAC upon request. The VMAC Lifetime Warranty is applicable to new products shipped on or after 1 October, 2015. Warranty Registration The VMAC warranty registration form is located near the back of this manual.
Page 7
VMAC if requested (along with the RMA number) for evaluation, unless otherwise instructed by VMAC. 4. Dealers may login to the VMAC website to view the VMAC Labour Time Guide (under “Agreements”) to see the allowable warranty labour times. 5. Warranty invoices must include the RMA/Service Ticket (CSR) number, VMAC System ID#, hours on the compressor, mileage on the vehicle, and a detailed description of the work performed.
Please contact VMAC for replacement hoses and further information. Ordering Parts To order parts, contact a VMAC dealer. The dealer will ask for the VMAC serial number, part number, description and quantity. Locate the nearest dealer online at www.vmacair.com/dealer-locator or call 1-877-912-6605.
Page 9
Standard Grade 8 National Fine Thread Size (in) 7/16 Foot pounds (ft•lb) Newton meter (N•m) Metric Class 10.9 Size (mm) Foot pounds (ft•lb) Newton meter (N•m) Table 1 — Torque Table VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: www.kb.vmacair.com...
Use only genuine VMAC replacement parts to maintain the system. Genuine VMAC replacement parts are designed to work with the high pressure and heat generated by the compressor. Substituting genuine VMAC replacement parts may void the warranty and could cause equipment damage, injury, or death.
☐ With the engine off (so that the clutch can be heard to engage), turn the VMAC system on. There should be a delay of approximately 700 ms from the time the system is enabled and the audible click of the clutch engaging.
Need help?
Do you have a question about the A700269 and is the answer not in the manual?
Questions and answers