Table of Contents
Advertisement
Appliance settings
en
Q
Appliance settings
You can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the buttons and
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function.
~ Page 13
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the i Cottons programme is shown
at position 1.
Press the Temperature s button and,
2.
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
40
Changing the signal volume
Use the Finished in ñ + or - button to
change the following settings at the
corresponding programme selector
positions:
2: The volume of the information
■
signals and/or
3: The volume of the button signals.
■
Exit setting mode or:
Selecting/deselecting the
appliance automatic switch-
off
With the programme selector in position
4, press the Finished in ñ + or - button
to switch the "Automatic switch-off"
function on or off.
Exiting setting mode
To exit and save the settings, press the
# button.
The appliance is switched off. The
selected settings will take effect the next
time the washing machine is switched
on.
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Advertisement
Table of Contents
