Advertisement
Installation and Wiring Instructions
UMD Mixed Flow In-Line
Fan Range
UMD100SA
UMD100TA
220-240V~50Hz
220-240V~50Hz
IPX4
PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS.
PLEASE SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
Related Manuals for Monsoon UMD100SA
Summary of Contents for Monsoon UMD100SA
- Page 1 Installation and Wiring Instructions UMD Mixed Flow In-Line Fan Range UMD100SA UMD100TA 220-240V~50Hz 220-240V~50Hz IPX4 PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS. PLEASE SAVE THESE INSTRUCTIONS...
- Page 2 Installation and Wiring Instructions for the UMD IN-LINE FAN range. IMPORTANT: READ THESE INSTRUCTIONS BEFORE COMMENCING THE INSTALLATION DO NOT install this product in areas where the following may be present or occur: • Excessive oil or a grease laden atmosphere. •...
- Page 3 I. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. J.
- Page 4 WIRING. WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE. THE UMD FANS ARE DOUBLE INSULATED AND CARRY A MARK. THERE ARE NO EARTH TERMINALS AND THESE FANS MUST NOT BE EARTHED. 1.
- Page 5 Speed Adjustment The fan has two speeds which are selectable by changing the position of the jumper. The fan is factory set to Setting 2 - High speed. To change the speed setting, pull the jumper off the header pins and place back onto the desired position, see Fig10.
- Page 7 National Ventilation Stathe Road Burrowbridge Somerset TA7 0RY Website: www.nationalventilation.co.uk email: info@nvagroup.co.uk Sales and technical hotline: 01823 690290 479967 A 0619...
Need help?
Do you have a question about the UMD100SA and is the answer not in the manual?
Questions and answers