Table of Contents
Advertisement
46
Troubleshooting
Troubleshooting
General
Symptoms
The unit does not work
properly.
The power does not turn
on.
Sound is not produced.
4
No woofer sound
The remote control does
not work properly.
The AUTO POWER
function does not work.
LG Sound Sync does not
work.
Cause & Solution
y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
Is the power cord plugged into the outlet?
y Connect the power plug to the outlet.
Is the volume set to minimum?
y Adjust the volume.
y When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
Is the mute function activated?
y Press [ or adjust the volume level to cancel the mute function.
Is the function selected properly?
y Check the input source and select the correct input source.
Is the subwoofer plugged in?
y Plug the power cord of subwoofer into the wall outlet securely.
Is pairing between the unit and the subwoofer disconnected?
y Connect the unit and the subwoofer. (Page 22)
Is the remote control too far from the unit?
y Operate the remote control within about 7 m.
Is there an obstacle in the path of the remote control and the unit?
y Remove the obstacle.
Are the batteries in the remote control exhausted?
y Replace the batteries with new one.
y Check connection of the external device such as TV, DVD/Blu-Ray player.
y Check the state of SIMPLINK on your LG TV and turn off SIMPLINK.
y Depending on the connected device, this function may not operate.
y Check whether your LG TV supports LG Sound Sync (Wired).
y Check connection of LG Sound Sync (Wired).
y Check sound setting of your TV and this unit.
Advertisement
Table of Contents
