Oi65 - Curtis G4GEMXNXXXSIFT User Manual

OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
NOTICE - Only use GEM3XN IntelliFresh
The G4 GEMX Intellifresh brewer is factory preset for optimal performance.
The brewer should be ON.
switch. "Ready to brew"
should be on the display.
4
into the brew rails under
the control panel. Slide it all
the way back until it stops.
Rotate the brew basket
desired dispenser.
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE section.
®
dispensers on GEMXN series IntelliFresh brewers.
Place an empty dispenser on
the brew platform. Make sure
that the dispenser is pushed
all the way back against the
front cover and is making
contact with the electrical
socket.
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
3
into the brew basket. Fill with
the proper amount of ground
coffee. Level the coffee in the
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off). Brewing will start
immediately after you enter
the brew code. See the
PROGRAMMING GUIDE to
set up/disable the brew code.

OI65

NC