Troubleshooting
4.
EPG
RELATED
Problem
Possible cause
■
1. The EPG is empty.
The selected
program supports no
EPG.
■
The local time is not
correct.
■
The daylight saving
time is not correct.
■
2. There is no weekly
The selected
program supports no
EPG.
weekly EPG.
5.
T
IMER RELATED
Problem
Possible cause
■
1. I cannot set a timer
The selected
because I have no
program supports no
EPG.
EPG.
■
The EPG settings
are not correct.
■
2. I cannot find the
-
programmed
timers.
Page 3 - 2
Problem
What to do?
3. My VCR did not
record the program.
■
There is no solution
for this, the data is
supplied by the
service provider and
beyond our control.
■
In the Local time
menu, set the correct
6.
time.
■
In the Local time
Problem
menu, set the correct
time.
1. No picture or sound
in the TV or Radio
■
There is no solution
mode.
for this, the data is
supplied by the
service provider and
beyond our control.
What to do?
■
In the EPG menu,
press the record key
2. Bad picture or noisy
and set the timer
sound in the TV or
manually.
Radio mode.
■
Read the solutions in
to solve an EPG
related problem.
■
Press the EPG key.
■
Press the record key.
■
Select applicable
timer.
Possible cause
■
You did not set the
VCR itself.
TV
R
AND
ADIO RELATED
Possible cause
■
Receiver is in
standby.
■
Cable related
problems.
■
Dish/LNB related
problems.
■
Teletext shows the
subtitle page without
titles.
■
Bad reception of the
signal.
■
Signal interference
with UHF-installation.
EchoStar International Corporation
What to do?
■
Set your VCR itself
also.
■
The Reminder timer
does not start your
VCR, it only switches
on the receiver so
that you can record
the program.
What to do?
■
Switch the receiver
on.
■
Check the cable
connections.
■
Make sure the dish
and LNB are
correctly adjusted.
■
Press the EXIT key
to leave Teletext.
■
Make sure the dish
and LNB are clean
and correctly
adjusted.
■
Check the UHF
settings. Make sure
you use the correct
channel. Please refer
to the TV/Radio user
guide.