Table of Contents
Advertisement
Getting Started
2.
U
NPACKING
CAUTION
It is recommended to keep the packaging
materials for a period of time. In case of
warranty claims, we can request to return
the receiver in the original packaging to
protect the electronics. Failing to do so
might void the warranty.
2.1.
TO UNPACK YOUR RECEIVER
WARNING
K
EEP AWAY THE PLASTIC PACKAGING FROM
. T
CHILDREN
HE PLASTIC PACKAGING MAY CLING
TO NOSE AND MOUTH AND PREVENT
.
BREATHING
When you unpack the contents of the box,
confirm that all the parts are included.
Unpack the contents of the box carefully.
Electronic equipment as receivers are easily
damaged when you handle it roughly. Examine
all parts for damage that may have occurred
during shipment. If you find any damage, stop to
unpack the box and call the shop where you
bought the receiver.
To help avoid possible damage to the receiver's
electronics, allow the receiver to adapt to the
ambient temperature and humidity level. This to
avoid condensation.
2.2.
T
HE CONTENTS OF THE BOX
The box contains:
■
A receiver;
■
A loop-through cable;
■
A remote control unit (RCU);
■
A pair of batteries (for the RCU);
■
A set of documentation.
Page 1 - 4
3.
I
NSTALL YOUR RECEIVER
WARNING
ALL EQUIPMENT INVOLVED IN THE INSTALLATION
TASK MUST BE INSTALLED CORRECTLY AND
. M
SWITCHED OFF
PROCEED WITH THE INSTALLATION TASK
U
NSAFE CIRCUITS AND INSTALLATIONS CAN
(
)
CAUSE
SERIOUS
.
EQUIPMENT
:
CAUTION
Tighten the F-connectors only by hand. Do
not use any tools. You will damage the
connector pins if you overtighten the
connector. This will result in loss of signal
quality, or even total loss of reception.
3.1.
G
UIDED INSTALLATION
NOTE
The loop-through configuration is pre-
programmed for a fixed dish installation with
a universal LNBF.
If you have another dish installation,
additional settings are required.
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. Make the required Language selections.
3. Make sure, the pre-programmed language
settings are convenient for you.
4. Press the Red key to advance.
5. Make the required Local time selections.
Note that GMT time is transmitted by the
satellite, EchoStar has no influence on this.
6. Press the Red key to advance.
7. Make the required User profile selections.
8. Press the Red key to advance.
Q
AKE SURE THAT IT IS SAFE TO
.
INJURY OR DAMAGE TO
Make the required Language selections.
Make the required Local time selections.
Make the required User profile selections.
UICK REFERENCE GUIDE
EchoStar International Corporation
Advertisement
Table of Contents
