Active Aerial - EchoStar T-105 User Manual

Active antenna

ACTIVE AERIAL

A A S
CTIVE ERIAL UPPORT
The receiver can support an active aerial.
If you use an active aerial, consult the
documentation that came with that aerial. at
least make sure the aerial is aimed in the
correct direction.
1. Switch the receiver to ON and wait for the
System setup menu to appear.
2. Select your Menu language and press the
SELECT key.
3. Wait for the Channels setup menu to
appear.
4. Press the Exit key to abort the automatic
setup sequence.
5. Select Antenna setup - Power.
6. Read the on-screen information.
7. Select On and press the EXIT key to
confirm.
8. Select Channels setup and press the
SELECT key.
9. Press the red key to start the automatic
channel search.
10. Wait for the Search channels to complete.
11. Press the EXIT key until live video shows.
12. Press the SELECT key to access the
channel list.
www.echostar-int.com
If there are no channels found,
Make sure the aerial is aimed in the correct
direction.
1. Troubleshoot you aerial and cabling. For
detailed instructions, please refer to the
section troubleshooting.
2. If everything seems to be fixed:
3. In the Channels setup menu, press the red
key to start the automatic channel search.
4. Wait for the Search channels to complete.
5. Press the EXIT key until live video shows.
6. Press the SELECT key to access the
channel list.
Q
UICK REFERENCE GUIDE
Select Installation - Antenna setup - Power On.
Press the red key.
Wait for the Search channels to complete.
Appendix 1
Page A1 - 1