Samsung DW-SG97 Series User Manual page 65

PROBLEM
Is too noisy.
Leaves a yellow or brown fi lm
on cups or dishes
Does not have any indicators
lit.
Does not have smoothly
rotating arms.
Leaves a white coating on
cutlery or crockery after
cleaning.
Starts by itself. (DW- SG97)
DD68-00135C-03_EN.indd 29 DD68-00135C-03_EN.indd 29
POSSIBLE CAUSE
The dishwasher beeps when the
dispenser cover is opened and
during the initial stage of draining
the pump operation.
The dishwasher is not level.
There is a 'chopping' sound
because an arm is bumping against
the dishes.
This can occurs from coff ee and tea
soils.
The power cord is not connected.
The arms are clogged with food
particles.
Hard water was used.
The dishwasher has not been
turned on for more than two days.
Troubleshooting and information codes
SOLUTION
This is a normal operation.
Ensure that the dishwasher is level.
Rearrange the dishes.
Use programme with higher
temperature.
Connect the power cord.
Clean the arms.
Check the salt fi ll indicator and
softener setting is correct according
to the water hardness of your area.
Check salt reservoir cap is correctly
fi tted.
This is an automated drying cycle
that keeps the SDP clean and is not
a malfunction. (If you wish to stop
the cycle, press the Power button.)
2013-06-26 2013-06-26
_29
2:56:56 2:56:56