Advertisement
Manuale di installazione
Installation manual
Installationsanleitung
Manuel d'installation
Manual de instalación
FORCE 825K/825KI
GB
Crash Tested rising bollard
FORCE 825k/FORCE825KI successfully
passed the crash test and achived a
Performance Rating of IWA14-1:2013
Rising Bollard V/2500(N1G)/64/90:5.0.
Made in Italy
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rise FORCE 825K
Summary of Contents for Rise FORCE 825K
- Page 1 FORCE 825K/825KI FORCE 825k/FORCE825KI successfully passed the crash test and achived a Performance Rating of IWA14-1:2013 Rising Bollard V/2500(N1G)/64/90:5.0. Made in Italy Manuale di installazione Installation manual Installationsanleitung Crash Tested rising bollard Manuel d'installation Manual de instalación...
- Page 2 Overall Dimentions 340x340 Ø 254 1420x1420 , 2 m 1237 1356 Ø 305 2 - FORCE...
- Page 3 We thank you for having chosen one of our Vigilant model automatic rising bollards. All articles in the Rise range are the fruit of long experience in the sector of mechanical and electronic automations. This is why today we are able to offer extremely innovative and reliable automatic rising bollards that, thanks to their per All our products are covered by a two-year warranty.
- Page 4 Assembly instructions - FORCE 825K/825KI Carry out the excavation in the ground with the measurements indicated in the image alongside and prepare a suitable draining foundation. 1500x1500 MIN. DRAINAGE TEST Dig a hole down to 1800mm and introduce approx 30lt of water.
- Page 5 Assembly instructions - FORCE 825K/825KI After positioning the case, make sure that the open recess is covered for the entire amount of time that the rising bollard is not inserted, with covering that is suitable to avoid accidents that may involve per- sons or property.
- Page 6 Assembly instructions - FORCE 825K/825KI The cable must be recovered while the bollard comes near the foundation case (ref A). Important: In this phase the connector must be free to slide inside of the corrugated sheath. For this reason is it necessary for the segment be-...
Need help?
Do you have a question about the FORCE 825K and is the answer not in the manual?
Questions and answers