Subscribe to Our Youtube Channel
Related Manuals for zewa 11115
Summary of Contents for zewa 11115
- Page 1 Model:11115 Infrared Thermometer User Manual Manual Version: 1.1 Issuing Date: 2020/11...
- Page 2 Introduction Thank you for choosing the Dual-mode Digital Infrared Thermometer. The infrared thermometer can be used to read the body temperature by measuring the ear and forehead temperature, which is suitable for adult and children (ear test mode only for the child above 3 months). Please read the instructions carefully before using the product and put it in a safe and secure place for reference.
-
Page 3: Table Of Contents
Contents 1. Advantages of the infrared thermometer..........1 2. Necessary safety instructions..............2 3.Instructions for product designs..............3 4.How to measure the forehead temperature..........4 5.How to measure the ear temperature............4 6.Instructions for display and operation............6 7.Cleaning and Disinfection................8 8.Maintenance.................... -
Page 4: Advantages Of The Infrared Thermometer
1. Advantages of the infrared thermometer Dual-mode design (forehead temperature and ear temperature),you can take body temperature by detecting the infrared ray given off by the forehead or eardrum. The measuring range of the thermometer in forehead /ear mode is between 32.0°F - 212.0°F (0 °C- 100 °C) . The product consists of ABS plastics, temperature sensor, Infrared temperature measuring element, microcomputer controlled circuit, LCD , backlight and buzzer. -
Page 5: Necessary Safety Instructions
[Cleaning and Disinfection] ● Do not try to repair the product if it is damaged. Please contact the nearest Zewa Customer Service. ● The device consists of precision parts with high quality. Please prevent the product falling off. -
Page 6: Instructions For Product Designs
● Battery Installation: Put the two AAA batteries into battery compartment in correct polarities. Install the battery cover along the arrow. Notes: ☆ If you are using the thermometer for the first time, Please pull out the insulation piece. ☆ Battery polarities should be correctly installed. Otherwise, damage may be caused to the device. -
Page 7: How To Measure The Forehead Temperature
Display description 1. Ambient temperature 2. Ready for measurement 3. Ear mode 4. Head mode 5. C / °F 6. Low power indicator 7. Memory mode 8. Temperature value How to measure the forehead temperature 1. With the sensor/probe cover attached, position the thermometer at the center of the forehead, just above the eyebrow, with a distance of 1-3cm. - Page 8 2. Insert the ear probe into the ear canal. 3. Press and release the EAR button. The reading will be displayed on the screen instantly. Note: Children under 1 year: Pull the ear straight back. Children aged 1 year to adult: Pull the ear up and back. In order to avoid the inaccuracy: (1) Please make sure that there is no dirt on the temperature sensor (2) Please make sure that the device only be used in room, and there is...
-
Page 9: Instructions For Display And Operation
6.Instructions for display and operation Operational method and instruction Sound and backlit display for displays 1.Measurement of forehead When the temperature: temperature is Position the thermometer at the center between 32.0°F/ of the forehead above the eyebrow. 0°C and 99.5°F/ With the thermometer touching the 37.5°C, there will be forehead, press and release the HEAD... - Page 10 3 short beeps with a red backlit for 3 The measured value falls below seconds. 32.0°F/0°C. Inquiry for memory data, Storing 20 temperature readings Operational method and instruction Sound and backlit display for displays Press and hold EAR button for 3-6 seconds and the LCD will display “- - -”...
-
Page 11: Cleaning And Disinfection
the “- - -°C/°F” temperature unit will start to blink. Press the EAR button again within 5 seconds to change the temperature unit to your choice. Error message & Low voltage LCD screen will display “Er1” when 3 short ticks and red ambient temperature exceeds backlit for 3 104.0°F/40.0°C or drops below... -
Page 12: Maintenance
Keep water off the lens during the cleaning process. Otherwise, the lens may be damaged. The lens may be scratched if it is cleaned with a piece of tissue paper, resulting in inaccurate readings. Do not clean the thermometer with corrosive cleansers. During the cleaning process, do not touch the lens using hard objects, immerse any part of the thermometer into liquid, or allow liquid to enter the thermometer. - Page 13 The thermometer is If the warranty period faulty. does not expire, contact Zewa or a local distributor. Only the battery The battery level is low. Use new batteries of symbol is the same model or displayed after the specifications.
- Page 14 Wait for more than 30 used within 30 minutes minutes after the after being taken from a thermometer is moved cold environment. into the measurement environment. The temperature probe Contact Zewa. The temperature is faulty. reading is higher than the typical body temperature range.
-
Page 15: Technical Specifications
11. Technical specifications Items Standards Model Infrared Ear Forehead Thermometer ℃/℉, adjustable Temperature units Forehead temperature mode:0.0℃-100.0℃ /32.0 F – 212.0 F Measurement range Ear temperature mode:0.0℃-100.0℃ /32.0 F – 212.0 F ±0.2℃ /±0.4 F(36℃-39℃/96.8℉-102.2℉) Accuracy ±0.3/±0.5℉(less than 36 °C (96.8°F) or more than (Laboratory) -
Page 16: After-Sale Service
Application for repairing should be presented during the warranty period. The damage caused by improper use is not under the warranty scope. Batteries and packaging are not under warranty scope either. After-sale service: Zewa, Inc. 12960 Commerce Lakes Dr. # 29 Fort Myers, FL 33913 E-mail：support@zewa.com Website: www.zewa.com... -
Page 17: Security Type
13. Security type The signal indicates that the thermometer is type BF applied part. 14. Authorized European Representative: 15. Symbols Symbol Description Type BF applied part. Attention must be paid. The action is prohibited. Information about a manufacturer, such as name and address. -
Page 18: Declaration
16.Declaration EMC of this product complies with IEC60601-1-2 standard. The materials which the user can come into contact have no toxicity and no action on tissues comply with ISO10993-1, ISO10993-5 and ISO10993-10. 17. Appendix A: EMC Information-Guidance and Manufacture’s Declaration CAUTION: ●... - Page 19 Guidance and manufacturer's declaration – electromagnetic immunity –for all EQUIPMENT and SYSTEMS Guidance and manufacturer´s declaration – electromagnetic immunity The Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer should assure that it is used in such an environment.
- Page 20 distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance where p is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m).
- Page 21 transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Infrared Thermometer is used exceeds the applicable RF compliance level above, the Infrared Thermometer should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the Infrared Thermometer.
- Page 22 NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
- Page 24 Zewa, Inc. 12960 Commerce Lakes Dr. # 29 Fort Myers, FL 33913 www.zewa.com Toll Free Customer Service: 1-888-993-3592...
Need help?
Do you have a question about the 11115 and is the answer not in the manual?
Questions and answers