Related Manuals for Classic Brands ADJUSTABLE AFFORDAMATIC 2.0 126019-5120
Summary of Contents for Classic Brands ADJUSTABLE AFFORDAMATIC 2.0 126019-5120
- Page 1 126019-5120 ADJUSTABLE AFFORDAMATIC 2.0 126019-5130 126019-5150 ASSEMBLY INSTRUCTIONS 126019-5160 Issued Date:4.7.2021...
-
Page 2: Part List
PART LIST Head/Foot Actuator x 1 (Pre- Control Box x 1 assembly on frame) Power Adapter x 1 (Pre-assembly on frame) (Pre-assembly on frame) Retainer Bar Twin XL Full Queen Size x 1 King Size x 2 Legs x 6 2pcs are pre-assembly on frame Remote x 1... - Page 3 STEP 1: Carefully take out the bed frame and open it as shown.
- Page 4 STEP 2: Cut all five (5) zip ties and remove all parts from the box.
- Page 5 STEP 3: Thread the bolt of the leg into frame and turn by hand until tight.
- Page 6 STEP 4: With two people, carefully flip over the base. Then insert the mattress retaining bar into the grommets as shown. . Two people required...
- Page 7 STEP 5: When ready to flip the base over, make sure you do not use the legs as leverage as they may damage the legs and/or base. Place mattress on top of base, ensuring edge of mattress makes contact with retaining bar to ensure no slipping.
-
Page 8: Remote Instructions
Remote Instructions HEAD DOWN : HEAD UP : Press and hold to lower the head section. Press and hold to raise the head section. FOOT UP: FOOT DOWN: Press and hold to raise foot section. Press and hold to lower foot section. HEAD AND FOOT UP: Press and hold to raise the head and foot HEAD AND FOOT UP:... - Page 9 PAIRING Pairing ONE REMOTE: HINT: To pairing, hold all three buttons at the same Each bed frame comes from the factory time. paired to its own remote. If not paired,Please follow these instructions: Step 1：Push the recover button on cord underneath the bed, hold the “head down”...
- Page 10 Synchronization SYNCING TWO TXL BASES FROM ONE REMOTE: Each bed frame comes synced to its own remote. You can use only one remote so put the 2nd remote away for safekeeping. Bed “A” is already paired. Step 1: Unplug bed “A” and take the “A” remote and sync it to bed “B”. Step 2: Press and hold the “head down”...
-
Page 11: Questions And Answers
Questions & Answers Q：The Control box is not working. A: Re-check the power supply. Q: The Control box's signal lost. A:Re-check battery capacity. Q: The remote is not working. A: Re-check the power supply. Q: The remote can not control. A: 1.unlock child lock. - Page 12 Classic Brands warrants this adjustable bed frame to you on the terms and over the reducing periods of time set out below. All warranty claims require notice from You to be given to Classic Brands in the manner set out below, and to be received by Classic Brands inside the applicable warranty time period.
- Page 13 Call Us First! Questions about your Adjustable Bed? We Can Help! Classic Brands stands behind all of our products and our 5-star Customer Service is committed to resolving any issue, so if you have any questions or concerns, please email us at azcustomerservice@classicbrands.com...
Need help?
Do you have a question about the ADJUSTABLE AFFORDAMATIC 2.0 126019-5120 and is the answer not in the manual?
Questions and answers
Re: 126019-5150 model. A recent power surge stopped my adjustable bed from working. I replaced the power supply and plug, but had neglected to reset the remote. After researching how to reset the remote, I had luck raising the head of bed. Turns out the original power supply and plug still work. But problem is - Now just the head section of the bed works. The foot section of the bed mechanism does not respond. I cannot change the DC power cord going from the control box to the head/foot actuator as the cord is permanently attached to the control box, even though the end of the cord attaching it to the actuator is removable. (I think I have those terms correctly assigned), but you get the idea. Please advise.