Table of Contents
Advertisement
VTX3
2.3 Marking
The marking of the devices in accordance with the description code is shown on the nameplates
below. On both the compact devices and the remote versions, the main plate is located on the
signal converter housing. On the remote versions there is an additional marking on the flow
sensor.
Compact versions with two signal converters for dual measurement (dual version) are each
marked with a nameplate, which is attached to each of the signal converter housings.
The details relevant to explosion protection are identical on both nameplates.
Figure 2-4: Example of a nameplate for the compact version
1 Device version VT3X K
2 Production order number
3 Serial number
4 Year of manufacture
5 Ex data according to KIWA 18 ATEX 0041X
6 Permissible ambient temperature range
7 Maximum values intrinsically safe circuits
8 Safety instructions, disposal and data matrix
9 Internet address of the manufacturer
12/2018 - Z-EN-09001-id-A Exi-Gb
DEVICE DESCRIPTION
www.bopp-reuther.de
2
5
Advertisement
Table of Contents
