Novopro PS1XXL Instruction Manual

Table of Contents

Download this manual

PS1XXL

I N S T R U C T I O N

M A N U A L

Manual version 2.1

This user manual will help you assemble and operate this product safely and quickly, so

please spend a few minutes to read through the enclosed information.

Due to continuous product development, please check for the latest version of this product manual at:

www.novopro.co.uk

Designed and engineered in the UK and manufactured in China for Novopro Ltd.

Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers.

At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.

Table of Contents

Need help?

Do you have a question about the PS1XXL and is the answer not in the manual?

Page 1 Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers. At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal. Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.
Page 2 F: 8 x M8 standard bolts | G: 4 x cross brace supports (when using at extended heights) | H: 9 x M8 x 2mm washers I: 1 x 35mm pole mount speaker adaptor | J: PS1XXL white scrim | K: PS1XXL black scrim | L: Plastic collar inserts (not shown) 2 x EVA foam pads for top plate (not shown) | Hook-and-loop fastener cable ties for securing cables (not shown) 1 x bag for base &...
Page 3 (mains/DMX etc) neatly against the legs of the stand and through the handle cut out in the top plate. Finally, carefully guide either the black or white scrim (J or K) over the unit to finish the assembly. The scrim will fit the PS1XXL when fully extended and they are designed to be folded or rolled over when using the stand at lower heights.
Page 4 Separating the base and top support legs (Diagram F) The PS1XXL have a safety stop clip inside the frame that is there to stop the unit coming apart if you over-extend the height of the frames. This part needs to be removed in order to fully disassemble the frame legs or access the plastic collar inserts (L): 1.