Novopro PS1XL Instruction Manual

Table of Contents

Download this manual

PS1XL

I N S T R U C T I O N

M A N U A L

Manual version 1.0

This user manual will help you assemble and operate this product safely and

quickly, so please spend a few minutes to read through the enclosed information.

Due to continuous product development, please check for the latest version of this product manual at:

www.novopro.co.uk

Designed and engineered in the UK and manufactured in China for Novopro Ltd.

Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers.

At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.

Table of Contents

Need help?

Do you have a question about the PS1XL and is the answer not in the manual?

Page 1 Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers. At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal. Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.
Page 2 Important: the unit comes with 4 x cross brace supports (G) which will reduce any lateral movement when using the PS1XL at extended heights. If you will not be using these cross brace supports, then please replace these with the M8 x 2mm washers (H) to ensure the bolts do not protrude through the integrated nuts on the top and base plates (as shown on diagram F).
Page 3 (mains/DMX etc) neatly against the legs of the stand and through the handle cut out in the top plate. Finally, carefully guide either the black or white scrim (J or K) over the unit to finish the assembly. The scrim will fit the PS1XL when fully extended and they are designed to be folded or rolled over when using the stand at lower heights.
Page 4 Unit dimensions for transport (WxDxH): 500mm 500mm x 990mm / 19.6 x 19.6 x 39 inches Gross weight: 17Kg / 37lb 7.6oz Maximum weight that the unit will support: 60Kg / 132lb Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.