Hoshizaki KMS-2000MLJ Instruction Manual page 35

2. Remove the water from the water tank:
17) Remove the insulation panel and front frame.
18) Disconnect the hoses connected to the water tank. Allow the tank and hoses to drain
completely. See Fig. 22.
19) Remove all ice from the dispenser unit/storage bin and clean the dispenser unit/storage
bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
20) Reconnect the hoses to the water tank.
21) Replace all removed parts and panels in their correct positions.
Inlet Water Valve Tee
Front View
Fig. 21
Wash Valve Hose
Inlet Water Valve
Wash Valve
Float Switch Vent Hose
Drain Valve
Drain Hose Tee
Drain Pipe
Pump Suction Hose
Float Connection Hose
Water Tank Drain Hose
35
Bottom View
Water Tank
Fig. 22