Connect To The Mobile Hotspot With Tethering; Customize The Mobile Hotspot Settings - AT&T Turbo Hotspot 2 User Manual

Connect to the Mobile Hotspot With Tethering

You can connect a computer to the mobile hotspot using the USB Type-C
cable instead of connecting with Wi-Fi. This kind of cable connection is
called tethering.
Note: The first time you use the USB Type-C cable to connect to the mobile
hotspot your computer's operating system detects the new device.
To install drivers on computers running Windows:
1. Ensure that the mobile hotspot is powered off.
2. Connect the mobile hotspot to your computer using the USB cable.
The mobile hotspot automatically powers on.
Note: Make sure that your computer has access to Internet when you first use
the tethering feature because your computer might need to access the
Internet in order to download the required software driver.
After the driver is installed,you can visit the mobile hotspot web page to
customize your mobile hotspot's advanced settings. This is an optional step.

Customize the Mobile Hotspot Settings

To log in to your mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot,
launch a web browser.
2. Enter http://192.168.1.1 or http://hotspot.webui. The mobile hotspot web
page displays.
3. Enter the administrator login password. The default password is the last
eight digits of IMEI . The password is case-sensitive.
11