The packaging before sterilization is as follows.
1) Put the probe into TYVEK
pouch.
2) Seal the TYVEK Pouch using
a heat sealer. Ensure that
the seal is complete.
3) Put the sealed pouch into a
tray or plastic mesh wire
for sterilization.
Fig. 4
Packaging in the pouch
TYVEK Pouch
Fig. 5
Tray for
sterilization
Probe in
the Pouch
Fig. 6
-12-
Probe
TYVEK Pouch
Sealed
Probe
Sealing
Packaging in a tray
Q1E-EP0403