Operation Procedure - Hitachi EUP-O53T Instruction Manual

3.

Operation Procedure

1) Confirm that the probe is disinfected and sterilized.
2) Connect the probe, operate the main unit, and adjust the image
according to the instructions given in the operation manual
for the main unit.
3) Relationship between direction of the probe and the image is
shown in Fig.2. The right-left orientation mark on the image
indicates the direction of the index mark on the probe.
Fig.2
4) If a biopsy method is required, refer to its instruction
manual.
5) After the use of the probe, it should be cleaned and disinfected
and sterilized, then store it in an adequate place.
1) Since the acoustic jelly accessory to the ultrasound
scanner is not a sterilized one, never use it.
2) We recommend you to use a sterilized probe cover in order
to minimize sticking of body fluid to the probe. Apply
sterilized jelly to the probe, then put the probe cover
on the probe head. Tightly contact the probe head with the
probe cover.
Right-left orientation mark
Relationship between Index Mark
and Right-left Orientation Mark
CAUTION
-5-
Index mark
Q1E-EP0403