Array Solutions VHQ HEX Assembly Instructions Manual page 8

As a note, some people have suggested a small amount of
cyanoacrylate glue applied to the inserted arm to prevent arms from
self-rotating over time.
At this point, your VHQ Hexbeam is starting to take
shape! With the help of another person, pull the arms
together as shown in fig.5 and secure the arms to the
center post with the supplied Kevlar supports, and repeat
this for all arms. Make sure you apply the band clamps at
the ends of the arms to secure the S-Hook as shown. All
the arm supports at this point, attach to the eyelet on
top of the center post.