Optoma W309ST User Manual page 67

ADDITIONAL INFORMATION
Key
Enter
Page -
Laser
Page +
Keystone
-
Volume
-
Aspect ratio / 1
Menu / 2
3D / 3
HDMI / 4
VGA / 5
Video / 6
User1 / 7; User2 / 8;
User3 / 9
Source
Brightness
mode / 0
Re-sync
Key Printing-key
code definition
C5 Enter
CA Enter
C2 Page-
N/A Laser
C1 Page+
85 Keystone+
+
84 Keystone-
8C Volume +
+
8F Volume -
98
/ 1
88 Menu/2
93 3D/3
86 HDMI/4
D0 VGA/5
D1 Video/6
D2 User 1/7
D3 User 2/8
D4 User 3/9
C3 Source
96
/ 0
C4 Re-Sync
Description
Confirm your item selection.
Press to page down.
Use as laser pointer.
Press to page up.
Press to adjust image distortion caused by tilting the
projector.
Press to adjust to increase / decrease the volume.
‡ Press to change aspect ratio of a displayed image.
‡ Use as numeric keypad number "1".
‡ Press to display or exit the on-screen display menus
for projector.
‡ Use as numeric keypad number "2".
‡ Press to manually select a 3D mode that matches
your 3D content.
‡ Use as numeric keypad number "3".
‡ Press to choose HDMI source.
‡ Use as numeric keypad number "4".
‡ Press to choose VGA source.
‡ Use as numeric keypad number "5".
‡ Press to choose composite video source.
‡ Use as numeric keypad number "6".
‡ User defined keys. Please see page 46 to
‡ Use as numeric keypad numbers "7", "8", and "9"
accordingly.
Press to select an input signal.
‡ Press to automatically adjust the picture brightness
to give an optimum contrast performance.
‡ Use as numeric keypad number "0".
Press to automatically synchronize the projector to the
input source.
setup.
67
English