Optoma W309ST User Manual page 37

USING THE PROJECTOR
Color Settings
Configure the color settings.
‡ BrilliantColor
enable higher brightness while providing true, more vibrant colors in picture.
‡ Color Temperature: Select a color temperature from Warm, Medium, or Cool.
‡ Color Matching: Select the following options:
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue: Adjust the color balance of red and green.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
‡ RGB Gain/Biase: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
Color
R
G
B
Reset
Exit
‡ Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
‡ Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
White Levele: Allow user to adjust White Level when inputting Video signals.
‡
Notee:
White level can only be adjusted for Video input source.
‡ Black Levele: Allow user to adjust Black Level when inputting Video signals.
Notee:
Black level can only be adjusted for Video input source.
‡ IREe: Allow user to adjust IRE value when inputting Video signals.
Notee:
‡
IRE is only available with NTSC video format.
‡
IRE can only be adjusted for Video input sources.
: This adjustable item utilizes a new color-processing algorithm and enhancements to
TM
Color Matching
White
37
English