Advertisement
Contents
Connections
ZONE2 Setup
Makes settings for audio playback with ZONE2.
0 Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale". (v p. 151)
0 This can be set when "Assign Mode" is set to "ZONE2". (v p. 183)
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
Front panel
Display
Playback
Settings
o Volume Level
Set the volume output level.
Variable
(Default):
1 – 98
(–79 dB – 18 dB):
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0 dB".
(v p. 151)
o Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
0 This can be set when "Volume Level" is set to "Variable". (v p. 205)
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0 dB".
(v p. 151)
205
Rear panel
Tips
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Do not set a maximum volume.
Remote
Index
Appendix
Advertisement
