Advertisement
Contents
Connections
Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items
Detailed items
Center Level Adjust
Subwoofer Level Adjust
Surround Parameter
Restorer
Audio
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
On Screen Display
Video
4K Signal Format
TV Format
Front panel
Display
Playback
Adjusts the center channel volume to clarify the dialog for all sources.
Adjusts the subwoofer channel volume for all input sources.
Adjusts surround sound parameters.
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
Compensates for incorrect timing between video and audio.
Sets the MAIN ZONE (room where the unit is located) volume setting.
Makes Audyssey MultEQ
®
, Audyssey Dynamic EQ
settings.
Uses the graphic equalizer to adjust the tone of each speaker.
Adjusts picture quality.
Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings.
Makes settings for video output.
Configures the on-screen display settings.
Set the 4K signal format when the TV or playback device is 4K compatible.
Sets the video signal format to be output for the TV you are using.
139
Rear panel
Settings
Tips
Description
®
and Audyssey Dynamic Volume
Remote
Index
Appendix
Page
144
144
145
149
150
151
152
®
154
156
157
163
166
167
168
Advertisement
